Development of SFC-MS Method for Quantification of Eicosanoids Biosynthesized in Primary Human Blood Cells.

Eicosanoids are lipid mediators generated from arachidonic acid with pro- and anti-inflammatory properties. Despite these lipid mediators being known for decades, quantitative determination in biological samples is still challenging due to low abundance, instability, the existence of regio- and stereoisomers, and a wide polarity range that hampers chromatographic separation. In this study, we developed a supercritical fluid chromatography mass spectrometry (SFC-MS) platform for the quantification of relevant eicosanoids. Application of a chiral amylose-based column and modifier combination of 2-propanol/acetonitrile offered separation and sufficient resolution of 11 eicosanoids (5-, 12-, 15-HETE, PGB1, LTB4, t-LTB4, 20-OH-LTB4, PGE2, PGD2, PGF2α, TxB2) with baseline separation of isobaric analytes within 12 min. The method was validated in terms of range (78-2500 ng/mL), linearity, accuracy, precision, and recovery according to EMA guidelines. Finally, we confirmed the method's applicability by quantifying eicosanoid levels in human primary blood cells. In conclusion, we present a validated SFC-MS method for the determination of relevant eicosanoids in biological samples with a wide range of polarity while maintaining baseline separation of isobars, which allows coupling to a single quadrupole mass detector.

Spatially and Temporally Controllable BMP-2 and TGF-ß3 Double Release From Polycaprolactone Fiber Scaffolds via Chitosan-Based Polyelectrolyte Coatings.

Temporally and spatially controlled growth factor release from a polycaprolactone fiber mat, which also provides a matrix for directional cell colonization and infiltration, could be a promising regenerative approach for degenerated tendon-bone junctions. For this purpose, polycaprolactone fiber mats were coated with tailored chitosan-based nanogels to bind and release the growth factors bone morphogenetic protein 2 (BMP-2) and transforming growth factor-ß3 (TGF-ß3), respectively. In this work we provide meaningful in vitro data for the understanding of the drug delivery performance and sterilizability of novel implant prototypes in order to lay the foundation for in vivo testing. ELISA-based in vitro release studies were used to investigate the spatial and temporal control of release, as well as the influence of radiation sterilization on protein activity and release behavior. Layer-by-layer coatings based on BMP-2-containing chitosan tripolyphosphate nanogel particles and negatively charged alginate showed a good sustainment of BMP-2 release from chemically modified polycaprolactone fiber mats. Release control improved with increasing layer numbers. The approach of controlling the release via a barrier of cross-linked chitosan azide proved less promising. By using a simple, partial immersion-based dip-coating process, it was possible to apply opposing gradients of the growth factors BMP-2 and TGF-ß3. Final radiation sterilization of the growth factor-loaded implant prototypes resulted in a radiation dose-correlated degradation of the growth factors, which could be prevented by lyophilization into protective matrices. For the manufacture of sterile implants, the growth factor loading step must probably be carried out under aseptic conditions. The layer-by-layer coated implant prototypes provided sustained release from opposing gradients of the growth factors BMP-2 and TGF-ß3 and thus represent a promising approach for the restoration of tendon-bone defects.

The inflammatory signalling mediator TAK1 mediates lymphocyte recruitment to lipopolysaccharide-activated murine mesenchymal stem cells through interleukin-6.

As a response to pro-inflammatory signals mesenchymal stem cells (MSCs) secrete agents and factors leading to lymphocyte recruitment, counteracting inflammation, and stimulating immunosuppression. On a molecular level, the signalling mediator TGF-ß-activated kinase 1 (TAK1) is activated by many pro-inflammatory signals, plays a critical role in inflammation and regulates innate and adaptive immune responses as well. While the role of TAK1 as a signalling factor promoting inflammation is well documented, we also considered a role for TAK1 in anti-inflammatory actions exerted by activated MSCs. We, therefore, investigated the capacity of lipopolysaccharide (LPS)-treated murine MSCs with lentivirally modulated TAK1 expression levels to recruit lymphocytes. TAK1 downregulated by lentiviral vectors expressing TAK1 shRNA in murine MSCs interfered with the capacity of murine MSCs to chemoattract lymphocytes, indeed. Analysing a pool of 84 secreted factors we found that among 26 secreted cytokines/factors TAK1 regulated expression of one cytokine in LPS-activated murine MSCs in particular: interleukin-6 (IL-6). IL-6 in LPS-treated MSCs was responsible for lymphocyte recruitment as substantiated by neutralizing antibodies. Our studies, therefore, suggest that in LPS-treated murine MSCs the inflammatory signalling mediator TAK1 may exert anti-inflammatory properties via IL-6.

ELISA- and Activity Assay-Based Quantification of BMP-2 Released In Vitro Can Be Biased by Solubility in "Physiological" Buffers and an Interfering Effect of Chitosan.

Chitosan nanogel-coated polycaprolactone (PCL) fiber mat-based implant prototypes with tailored release of bone morphogenic protein 2 (BMP-2) are a promising approach to achieve implant-mediated bone regeneration. In order to ensure reliable in vitro release results, the robustness of a commercially available ELISA for E. coli-derived BMP-2 and the parallel determination of BMP-2 recovery using a quantitative biological activity assay were investigated within a common release setup, with special reference to solubility and matrix effects. Without bovine serum albumin and Tween 20 as solubilizing additives to release media buffed at physiological pH, BMP-2 recoveries after release were notably reduced. In contrast, the addition of chitosan to release samples caused an excessive recovery. A possible explanation for these effects is the reversible aggregation tendency of BMP-2, which might be influenced by an interaction with chitosan. The interfering effects highlighted in this study are of great importance for bio-assay-based BMP-2 quantification, especially in the context of pharmaceutical release experiments.

Varying the sustained release of BMP-2 from chitosan nanogel-functionalized polycaprolactone fiber mats by different polycaprolactone surface modifications.

Polycaprolactone (PCL) fiber mats with different surface modifications were functionalized with a chitosan nanogel coating to attach the growth factor human bone morphogenetic protein 2 (BMP-2). Three different hydrophilic surface modifications were compared with regard to the binding and in vitro release of BMP-2. The type of surface modification and the specific surface area derived from the fiber thickness had an important influence on the degree of protein loading. Coating the PCL fibers with polydopamine resulted in the binding of the largest BMP-2 quantity per surface area. However, most of the binding was irreversible over the investigated period of time, causing a low release in vitro. PCL fiber mats with a chitosan-graft-PCL coating and an additional alginate layer, as well as PCL fiber mats with an air plasma surface modification boundless BMP-2, but the immobilized protein could almost completely be released. With polydopamine and plasma modifications as well as with unmodified PCL, high amounts of BMP-2 could also be attached directly to the surface. Integration of BMP-2 into the chitosan nanogel functionalization considerably increased binding on all hydrophilized surfaces and resulted in a sustained release with an initial burst release of BMP-2 without detectable loss of bioactivity in vitro.

Cell culture media notably influence properties of human mesenchymal stroma/stem-like cells from different tissues.

BACKGROUND AIMS: Mesenchymal stroma/stem-like cells (MSCs) are a popular cell source and hold huge therapeutic promise for a broad range of possible clinical applications. However, to harness their full potential, current limitations in harvesting, expansion and characterization have to be overcome. These limitations are related to the heterogeneity of MSCs in general as well as to inconsistent experimental protocols. Here we aim to compare in vitro methods to facilitate comparison of MSCs generated from various tissues. METHODS: MSCs from 3 different tissues (bone marrow, dental pulp, adipose tissue), exemplified by cells from 3 randomly chosen donors per tissue, were systematically compared with respect to their in vitro properties after propagation in specific in-house standard media, as established in the individual laboratories, or in the same commercially available medium. RESULTS: Large differences were documented with respect to the expression of cell surface antigens, population doubling times, basal expression levels of 5 selected genes and osteogenic differentiation. The commercial medium reduced differences in these parameters with respect to individual human donors within tissue and between tissues. The extent, size and tetraspanin composition of extracellular vesicles were also affected. CONCLUSIONS: The results clearly demonstrate the extreme heterogeneity of MSCs, which confirms the problem of reproducibility of results, even when harmonizing experimental conditions, and questions the significance of common parameters for MSCs from different tissues in vitro.

Heparin Anticoagulant for Human Bone Marrow Does Not Influence In Vitro Performance of Human Mesenchymal Stromal Cells.

Mesenchymal stromal cells (MSCs) are a promising cell source for tissue engineering and regenerative medicine. In our lab, we found that MSC preparations from bone marrow of many different donors had a limited capacity of in vitro differentiation into osteogenic and chondrogenic lineages-a capacity claimed to be inherent to MSCs. The current study was designed to test the hypothesis that the amount of heparin used as anticoagulant during bone marrow harvest had an inhibitory influence on the in vitro differentiation capacity of isolated MSCs. Bone marrow was obtained from the femoral cavity of twelve donors during total hip arthroplasty in the absence or presence of heparin. No coagulation was observed in the absence of heparin. The number of mononuclear cells was independent of heparin addition. Isolated MSCs were characterized by morphology, population doubling times, expression of cell surface antigens and in vitro differentiation. Results of these analyses were independent of the amount of heparin. Transcriptome analyses of cells from three randomly chosen donors and quantitative realtime PCR (qRT-PCR) analysis from cells of all donors demonstrated no clear effect of heparin on the transcriptome of the cells. This excludes heparin as a potential source of disparate results.

Sustained release of TGF-ß3 from polysaccharide nanoparticles induces chondrogenic differentiation of human mesenchymal stromal cells.

Medical treatment of certain diseases and biomedical implants are tending to use delivery systems on the nanoscale basis for biologically active factors including drugs (e. g. antibiotics) or growth factors. Nanoparticles are a useful tool to deliver bioactive substances of different chemical nature directly to the site where it is required in the patient. Here we developed three innovative delivery systems based on different polysaccharides in order to induce a sustained release of TGF-ß3 to mediate chondrogenesis of human mesenchymal stromal cells. We were able to encapsulate the protein into nanoparticles and subsequently release TGF-ß3 from these particles. The protein was still active and was able to induce chondrogenic differentiation of human mesenchymal stromal cells.

Stability and Biological Activity of E. coli Derived Soluble and Precipitated Bone Morphogenetic Protein-2.

PURPOSE: There is a plethora of studies on recombinant human bone morphogenetic protein-2 (rhBMP-2) application and delivery systems, but surprisingly few reports address the biophysical properties of the protein which are of crucial importance to develop effective delivery systems or to solve general problems related to rhBMP-2 production, purification, analysis and application. METHODS: The solubility, stability and bioactivity of rhBMP-2 obtained by renaturation of E. coli derived inclusion bodies was assessed at different pH and in different buffer systems using (dynamic) light scattering and thermal shift assays as well as intrinsic fluorescence measurements and luciferase based bioassays. RESULTS: rhBMP-2 is poorly soluble at physiological pH and higher. The presence of divalent anions further decreases the solubility even under acidic conditions. Thermal stability analyses revealed that rhBMP-2 precipitates are more stable compared to the soluble protein. Moreover, correctly folded rhBMP-2 is also bioactive as precipitated protein and precipitates readily dissolve under appropriate buffer conditions. Once properly formed rhBMP-2 also retains biological activity after temporary exposure to high concentrations of chaotropic denaturants. However, care should be taken to discriminate bioactive rhBMP-2 precipitates from misfolded rhBMP-2 aggregates, e.g. resolvability in MES buffer (pH 5) and a discrete peak in thermoshift experiments are mandatory for correctly folded rhBMP-2. CONCLUSIONS: Our analysis revealed that E. coli derived rhBMP-2 precipitates are not only bioactive but are also more stable compared to the soluble dimeric molecules. Knowledge about these unusual properties will be helpful to design improved delivery systems requiring lower amounts of rhBMP-2 in clinical applications.